Digiwave AR-500plus Programmable HDTV Antenna Rotator
Go kalles this summer with this vintage navy and white striped v-neck t-shirt from the Nike. Perfect for pairing with denim and white kicks for a stylish kalles vibe.
CONTROL UNIT
Compatible With Most Universal Remote Controls (including satellite)
Non-Volatile Memory – Holds Locations During Power Failures
Automatic Synchronization Ensures Pinpoint Position Accuracy
Direct Access via TV Channel Number or Digital Compass Location
Unobtrusive Control Blends With Any Décor
DRIVE UNIT
One-Piece Cast Aluminum Housing
Heavy-Duty Rotator Motor
Wind-Tested Brake Pads
Durable Powder-Coat Paint Finish
Precision-Cut Gear System
Built-In Steel Thrust Bearings
With 12 channels memory station keys, 2 digital displays:1 for channel station indicator, 1 for direction indicator.
Manual key controls rotation to antenna.
Power operation returns to o automatically.
One touch choice.
Memory function continues to function when power is off.
Operation with infrared remote control and manual. Remote range is the same as for TV, about 10 meters.
Learn key: have the function to measure the time of driver running at one cycle.
Model# |
AR-500 plus |
POWER SOURCE |
120VAC, 60HZ, 26W |
MOTOR |
18VAC |
ROTATION |
360 °± 10°WITH MECHANICAL STOP |
ROTATION TORQUE |
182 kg-cm (160LBS-IN) MIN. |
ROTATION TIME |
80 SEC. |
VERTICAL LOAD |
36 Kg (99 LBS) MAX. |
MASTER SIZE |
28 ~ 44.5 mm (11/3 ~ 1 ¾”) DIAMETER |
CABLE |
3 CORD |
DIMENSION (mm) |
300x200x185 (GIFT BOX) |
WEIGHT (g) |
3900 (INCLUDING GIFT BOX) |
Additional Information:
A Rotor or Rotator is a mast-mounted, motor-driven device that permits the TV viewer to conveniently rotate (orient) the outdoor antenna in any direction to optimize reception of a desired TV channel. A rotor should be considered when TV signals are being derived from broadcast towers in different directions and a single antenna cannot accommodate all locations.
A rotator consists of two parts: 1) an indoor control unit, and 2) an outdoor drive unit. The two are connected via a multi-conductor wire that carries the voltage and control signals from the indoor unit to the outdoor drive unit.